Cost guide · Updated Aug 7, 2026
Electrician cost in Tampa in 2026
Tampa electricians run $70 to $130 per hour in 2026 — median around $95 — with rates elevated by insurance requirements and post-Milton demand. Hurricane-shutter motor wiring runs $350 to $900 per opening; a whole-home generator hookup is $3,200 to $6,000 in labor plus any panel work. Flood-zone panel elevation adds $600 to $1,400 on top.
Typical range
$70 – $130 / hr
~$95/hr · shutter wiring $350–$900 per opening · generator hookup ~$4,500 labor
By scope
| Scope | Price | Notes |
|---|---|---|
| Single motorized shutter circuit | $350 – $900 | |
| Whole-house motorized shutters (6–10 openings) | $2,500 – $5,500 | |
| Portable-generator inlet + interlock | $900 – $1,800 | |
| Whole-home standby hookup (labor only) | $3,200 – $6,000 | |
| Flood-zone panel elevation adder | $600 – $1,400 |
What swings the price
- Wind-mitigation inspection alignment — insurance discount depends on it.
- TECO / Duke Energy coordination for meter pull.
- Flood-zone panel elevation requirements post-2023 code.
- Permit ($125–$300).
- Insurance carrier documentation for storm-hardening credits.
Tampa specifics
Hillsborough and Pinellas now require flood-zone electrical panels to be elevated above base flood elevation on new or replaced services, which adds $600 to $1,400 to any panel-adjacent job. Post-Milton (October 2024) demand keeps licensed master-electrician wait times at 3–6 weeks through summer, so booking storm-hardening work in the January-April window is the smart play if you can flex.
Skip the calling
Get real Tampa quotes for $5.99
The ranges above are what you should expect. To get real numbers from real Tampa pros — anonymously, without handing your phone to a lead-gen marketplace — we dial local pros for you and email you a one-page comparison. Full refund if we land fewer than 2 quotes.
FAQs
How much does hurricane shutter wiring cost in Tampa?
$350–$900 per motorized opening for a dedicated circuit and wiring run from the panel. A whole 6- to 10-opening house runs $2,500–$5,500. If the openings are close to the panel and the runs are short, expect the low end; long runs through finished walls push toward the top.
What does a Tampa electrician charge per hour?
$70–$130/hr in business hours — median around $95. Rates are elevated compared to non-hurricane markets because insurance carriers require storm-hardening documentation, which adds admin overhead to every job.
Do I need a permit for shutter or generator wiring in Tampa?
Yes for any new circuit or panel work. Permit runs $125–$300 depending on scope and municipality (Tampa city vs. unincorporated Hillsborough vs. Pinellas). A licensed electrician pulls it as part of the job.
Why does Tampa flood-zone code add so much?
Post-2023 code updates require panels serving flood-zone properties to be mounted above base flood elevation. That often means new conduit, a raised mounting board, and sometimes relocating the service entrance — all of which add $600–$1,400 to any panel-adjacent job in the flood zones (which is most of coastal Pinellas + South Tampa).
How long is the wait for storm-hardening work in Tampa?
Licensed master electricians run 3–6 weeks out through summer. October–April is the quiet season — same work is often 15–20% less and you'll get scheduled in a week.
Sources
Related cost guides
Electrician hourly + panel upgrade
Electrician cost in New York in 2026
$150 – $300 / hr
Electrician hourly + panel upgrade
Electrician cost in Los Angeles in 2026
$110 – $200 / hr
Electrician hourly + panel upgrade
Electrician cost in Phoenix in 2026
$95 – $170 / hr
Junk removal
Junk removal cost in Tampa in 2026
$130 – $890
Prices refresh quarterly. Last review: Aug 7, 2026.